What Are Dry Cooler Systems?

Dry cooler (dry cooler), water or water/glikol mixture only outdoor air and fanlar with the help cooling leaf Tube is a heat exchanger. Inside cooler gas cycle and compressor none; heat tamamen closed circuit to the air is transferred.

Reachable liquid temperature exterior air dry termometre warm is connected; practical of the environment Approximate +5 / +7 °C on as much chilled water elde is done. Standard capacity EN 1048’e according to (air 25°C, water 40/35°C) is calculated.

Horizontal, vertical, sandwich and V-Type Construction; EC fan and Adiabatic/evaporatif opsiyonlarla plastic, energy, food, pharmaceutical, Paper, cement and free-cooling application is used.

Dry cooler

Closed Circuit Dry Cooler Units

Unit; Copper Tube / aluminum fin batarya, Axial fans and Electrostatic coated galvanized casing a araya getirir. Closed circuit thanks to water air temas etmez; kirlenme and scaling does not form.

• Refrigerant: Su veya su / etilen glikol.
• Construction: Horizontal · vertical · V-Type · sandwich.
• Test: 20–25 bar pressure testi.
• Outdoor: IP54 fan · UV/corrosion protection paint.

Batería

Copper Tube / Aluminum fin Batarya

High efficient heat changer bataryalar Copper Tube and aluminum fin with is produced. Fin spacing tipik 2,1–3,2 mm; standard leaf Fin pitch ~2,5 mm’dir. Epoxy, gold epoxy, hidrofilik or Copper folyo Coating options is offered.

• Estándar: Cu boru · Al lamel.
• Collector: Steel · flange connection · air commissioning / discharge.
• Koruma: Epoxy · hidrofilik · Copper folyo option.
• Donma: In winter glikol-water mixture is recommended.

Aplicación

Free-Cooling and Process Heat Rejection

Exterior air suitable when it is chiller compressor circuit exterior leaving cooling dry cooler’a devretmek is possible. Also water cooled chiller condenser suyunun cooling and directly process cooling for is used.

• Free-cooling: Low energy with ara mevsim cooling.
• Kondenser suyu: Open kule yerine closed circuit.
• Proses: Plastic, metal, kimya, food lines.
• Enerji: Termik santral ve kojenerasyon.

Lista de equipos estándar

AGA dry cooler systems are supplied with the following components:

• Copper Tube / aluminum fin heat heat exchanger coil
• Aksiyel fan · Ziehl-Abegg / Rosenberg / EBM
• Partition sheet between fan sections
• Steel Collector · flange connection
• Automatic air and water tahliye purgers
• Electrostatic powder coated galvanized casing
• Mounting feet · lifting lugs
• Intervention / temizlik covers
• Fan speed control (stepli / sequential operation)
• IP54 fan Motor protection · insulation F
• Opsiyon: EC fan · adyabatik petek · su spreyleme
• Option: electrical Panel board · vibration preventive